All Products

Stop Sleeve sold in multiples of 5.
(for one order you will receive 5 Sleeves, 2 orders 10 sleeves etc)

Stop Sleeve sold in multiples of 5.
(for one order you will receive 5 Sleeves, 2 orders 10 sleeves etc)

Stop Sleeve sold in multiples of 5.
(for one order you will receive 5 Sleeves, 2 orders 10 sleeves etc)

Stop Sleeve sold in multiples of 5.
(for one order you will receive 5 Sleeves, 2 orders 10 sleeves etc)

Stop Sleeve sold in multiples of 5.
(for one order you will receive 5 Sleeves, 2 orders 10 sleeves etc)

Stop Sleeve sold in multiples of 5.
(for one order you will receive 5 Sleeves, 2 orders 10 sleeves etc)

A transparent double-sided self-adhesive tape consisting of a PET backing and a modified acrylic adhesive.

The pilot navigation log is a must have for all pilots.
This product comes with FREE delivery.

Schempp-Hirth fuel vent bottle connector.
(Typically used on; most SH Turbo models)

Portable but with industrial Strength: Each bag is made of strong plastic that is puncture resistant and contains our revolutionary LIQSORB® polymer pouch that solidifies liquids instantly into a leak-proof, odourless, spill-proof gel that is non-toxic and safe for disposal in any waste bin.

Schempp-Hirth fuel filter (incorporating paper filter).
(Typically used on; most SH Turbo models)

Schempp-Hirth P-Clip for holding ignition cable.
(Typically used on; most Schempp-Hirth Turbo models)

Schempp-Hirth wing tip bush for Ventus 2c 15m/18m.

Solo, M8 turbo stud.
(Typically used on; SH Turbo Models)

Condition: Used

Schempp-Hirth Oil Tank Mounting Bracket Bolt.

Sleeve used with Rotax 535 Engines.

Available in Left and Right hand.

Available in 48mm width.

The RAP-B-238U ball base consists of a 1" B size rubber ball connected to a 2.43" x 1.31" diamond plate. The diamond plate features two holes that measure 1.912" from center to center, matching the industry-standard AMPS hole pattern. This diamond ball base is compatible with a wide variety of RAM® device holders and cradles.

A transparent double-sided self-adhesive tape consisting of a PET backing and a modified acrylic adhesive.

The MK IV “high tech” Yaw String - is the only Yaw Strig with a clear turbulator base. Do not be fooled by imitations. This is not your ordinary yaw string. The clear base raises the synthetic yarn 0.038″ above the canopy eliminating scratches and reducing static charge.

main-pivot-shaft-turbo

Yellow T Handle, for cable release operation on many Gliders.
(Typically used on; most Schempp-Hirth models)

Schempp-Hirth seat back pump/inflator.
(Typically used on; older SH seat backs, and occasionally for fuel priming on older SH Turbo models)

Slso for the back trap between rear door and floor

PN: L06-0402

Price per metre.

Solo, stud M8 x 59 for Solo 2625-01 exhaust.

Part No: 015294

Solo, stud M8 x 64 for Solo 2625-01 exhaust.

Part No: 015215